Magic Heat Wood Stove Heat Reclaimer For 6" Pipe (MH-6R)
Couldn't load pickup availability
Magic Heat Wood Stove Heat Reclaimer For 6" Pipe
The Magic Heat MH-6 is a 6-inch wood stove heat reclaimer that is designed to reclaim lost heat and increase the efficiency of your wood stove. It has a built-in thermostat and a blower fan that ensures trouble-free operation. The Magic Heat MH-6 is made in the USA and is UL approved for both the US and Canada. It has 31 amps, 225 CFM, and mounts 12 to 24 inches above the appliance. The Magic Heat MH-6 can only be used with a single wall connector pipe and the electrical cord must be kept 12 inches from the stove or stovepipe.
About this item
- Only UL listed heat reclaimer on the market. Reclaims up to 30% of otherwise lost heat going up your chimney and distributes it into your home.
- Crimp down configuration is designed for use with wood burning heating applications with inside flue temperatures exceeding 350 degrees and surface temperatures of the single wall pipe below the Magic Heat exceeding 280 degrees.
- Easy to install. Fits 6" flue diameter. Built in soot scraper cleans tubes internally allowing for maximum heat transfer.
- Plugs into any standard 110V household outlet. Removable back allows for easy maintenance. Designed for use with single wall connector pipe.
- Toggle switch allows the 225 CFM fan to operate in two modes, either run continuously or thermostat control mode. Made in the USA. One Year Limited Warranty.
Features:
- Efficient Heat Reclamation: The 6" Magic Heat Reclaimer is a true heat exchanger, utilizing the laws of thermodynamics to capture heat from exhaust air traveling up the flue. Ten heat exchanger tubes circulate and heat the air from outside the stove pipe, reclaiming heat that would otherwise be lost.
- Thermostatically Controlled: Equipped with a built-in, pre-set thermostat, the blower fan activates and deactivates automatically, ensuring optimal temperature regulation for trouble-free operation. The fan turns on at 150 degrees, off at 120 degrees, or can run continuously based on your heating needs.
- Money-Saving Operation: By reclaiming lost heat, this product helps you save on heating costs. Its energy-efficient design is suitable for all types of heating equipment with inside flue temperatures exceeding 350 degrees, and skin temperatures of 250 degrees.
- Easy Installation: The 6" Magic Heat Reclaimer is a single-piece unit that easily installs in-line with new or existing single-wall stove pipes. It mounts 12" to 24" above the appliance and requires a minimum 18" clearance from combustible materials. The 6-foot power cord plugs into any standard 110V home outlet.
- Crimped Pipe on Bottom: The crimped design on the bottom ensures a secure and reliable fit, enhancing stability during installation.
- Universal Fit for 6-inch Flues: Compatible with 6-inch flues commonly found in wood stoves, offering versatility and broad applicability.
Specifications:
- Type: Heat Reclaimer
- Material: Steel
- Overall Width: 10 3/4"
- Overall Height: 14 1/2"
- Unit Depth: 14"
- CFM (Cubic Feet per Minute): 225
- Voltage: 115V
- Amps: .31
- BTU Output Variable: 8000 minimum/30,000 maximum
- Pipe Size: Diameter: 6"
- Color: Black
Suitable for use with coal-burning stoves with natural draft
Maintenance and Cleaning:
Daily cleaning involves using the Soot Scraper knob, and burning paper or cardboard every other day to assist with tube cleaning. Periodic manual inspections and cleanings are recommended, using a long-handled brush and cleaning solvent or a commercial soot remover.
Invest in the 6" Magic Heat Reclaimer to enhance the warmth and efficiency of your wood stove. Designed and made in the USA, this product is not only a practical addition but also an investment in energy savings for your home. Enjoy the benefits of reduced heating costs and a more comfortable living space with the 8" Magic Heat Wood Stove Heat Reclaimer.
How It Works:
As hot flue gases travel from your heating appliance upward through the flue, they heat the transfer tubes in the inner case. Fresh air enters through the back vents and is heated while traveling through the transfer tubes. The 225 CFM fan pushes out the warmed air through the tubes and into your home reclaiming up to 30,000 BTU of lost heat. Flue gases are not restricted and flow up your chimney.
Use Magic Heat to Save Lost Heat!
- Magic Heat’s ten heat transfer tubes maximize the surface area required to effectively exchange heat. The built in soot scraper cleans tubes internally allowing for maximum heat transfer.
- Magic Heat is the only UL-listed heat reclaimer on the market because it does not reduce the flue diameter. The open inner casing design allows hot flue gases to travel upward without restriction.
- Easy to service with removable back. There’s no need to dismantle the Magic Heat in order to service or clean it.